Izdelki za jeklena jekla (79)

High-speed tool steel Application: All types of cutting tools used to process carbon alloy structural steels, mainly threading tools and tools operating with impact loads. Steel grade:Р6М5; cipher 079 Foreign steel grade analogues:HS6-5-2 (Germany)

scrap and waste of corrosion-resistant steels alloyed with chromium and nickel according to GOST 2787-75 delivery to the buyer's warehouse

Without bolts and fully assembled at the factory monolithic carbon-stainless steel adapters installed during the ground-to-air transition and connects pipelines of various steel grades Diameter:From 0.9 to 21 inches Wall thickness of steel pipe:From 0.12 to 0.99 inches Working medium temperature:up to 60◦ С

Hot dipped and electro galvanized steel wire is used to armour cables and wires, it is made from low carbon rods. DIN:160, 200

Iceberg Siberia Premium Ice Fishing Auger, Steel Cutting Head, Curved Blades - IcebergSiberia is a highquality ice auger with classical clockwise rotation and a drilling diameter of 160 mm, which perfectly copes with dry and wet ice drilling. Its handle folding mechanism prevents backlash and makes it easier to get the auger into the working condition. The telescopic extension pole with special fixed holes provides adjustment of the ice auger length for various ice thicknesses and angler’s height. The maximum drilling depth without extension is about 1,6 meters. Reliable polymer coating withstands temperature fluctuations and heavy mechanical loads. The nonremovable metal head guarantees a constant cutting angle of the blades. Highquality steel blades are suitable for all types of ice and provide easy drilling. A center drill ensures better centering during the drilling with a cordless or motor drill. It is also possible to install a drill motor. It can be attached either directly to the auger or through an extension. Diameter, mm:160 Color:Yellow

Planter «Steel» - Planters Diameter:500 mm Heigth:503 mm Material:steel, powder coating Diameter:1100 mm Heigth:1005 mm Material:steel, powder coating

Frame modular formwork MSK is light panel formwork, main element has the following dimensions 100 cm x 150 cm. Mounting element height is 7.5 cm. Bearing structure is a rack screen of strip iron with dimensions of separate cells of 25 x 25 cm. 11-layered plywood board 15 mm thick covered with laminated film is inserted into the structure of steel frames. • Foundation formwork • Wall formwork • Lift well formwork • Wall formwork (compound node points) • Column formwork • Bent surface formwork Modular formwork MSK has ideal gradation of all height ranges, from foundation to necessary wall heights. Base element width is 100 cm. Due to great width range of finishing (fitting) elements, for example 75, 60, 50, 45, 40, 35, 30 and 25 cm and presence of compensating element of 5 cm, formwork can be adapted to any monolith project. At construction sites where there is no crane formwork installation can be executed manually due to light weight of elements.

Сylindrical pots: volume 5,5L 7,0l 9,0l 12,0l, color: White granite. Conteiners: volume 0,8L 1,5l 2,5l, color: White with blue rim. Mugs: volume 0,25L 0,4l 1,0l color: White with blue rim. Bowls : volume 0,8L 1,0l 1,5l 2,0l color: White with blue rim. Plates: volume 2,0L color: White with blue rim. steel thickness (Conteiners):0,8 mm steel thickness (Сylindrical pots):0,6 mm steel thickness (Bowls):0,5 mm steel thickness (Mugs):0,6 mm steel thickness (Plates):0,8 mm

The NSBon-00 mounting kit is designed for simple and quick installation of additional accessories inside the NSB-xxyy series electrical enclosures. When using the NSBon-00 kit, no mechanical modification of the cabinet is required, for example, additional holes or opening. Additional equipment is mounted on any interior side surface of an enclosure. Installation kit material is zinc-plated sheet steel. Two rows of system perforations provide additional flexibility in the installation of various equipment. The NSBon-00 mounting kit is recommended and used to install the following accessories: Fiber Optic Distribution Frame (ODF); 24VAC power systems NSBon-31/32/33 (transformers); Door-operated switch NSBon-05; Holder for a cable hose or bundle of cables; Vertical system chassis; Additional customer equipment; Material:Sheet steel Surface finish:Zinc-plated To fit:NSB-xxyy series enclosures : Depth: = 210 mm Packs of:4 pcs Weight/pack:0.7 kg

Synlube DU is a HFDU type fire resistant hydraulic liquid based on synthetic esters with a range of highly effective additives. It is used in oil hydraulic systems in which the working liquid can be heated above 70 °C and oil ignition in an emergency is possible. Appearance:light transparent liquid Density at 20 C, kg/m3:915 Kinematic viscosity at 40 °C, mm2/s:46 Kinematic viscosity at 100 °C, mm2/s:9,5 Viscosity index:183 Flash point, open cup, °C:300 Self-ignition point, °C:400 Pour point, °C:-45 Package:Steel drum 190 kg IBC 900 кг

The magnetic coupling drives for stirring devices are designed to be installed immediately into the tank and provide the necessary stirring of the product. The drive is electrically driven and consists of two half-couplings (driven and driven magnetic half-couplings), bearing assembly and the stirring device itself. Stirring devices (mixers) are of several types: paddle, anchor, propeller, U-type, etc. We develop and supply turn-key solutions for our customers. Magnetic coupling drives for stirring devices are custom-tailored for each specific customer's application in accordance with the sketches provided or according to the parameters specified in the questionnaire form.

Round hot tub Furako 180*120cm made of varnished pine polypropylene insert and internal stove 25 kW Hot tub material: Pine, stainless steel hoops Internal oven 25 kW: Stainless steel AISI 304 2mm. MATEA production. Rivet thickness: 45 ± 2mm Polypropylene insert + lacquer coating + Internal wood-burning stove with three circulation pipes + Chimney consisting of one elbow 1m long with a canopy (for the internal stove) + Stove grillage + External ladder + Circular seat + Solid wood paddle + Plumbing drain + Wooden lid for 2 halves made of varnished pine Ash Cleaning set. Special kit for indoor stoves, stainless steel scoop and poker with long handles for easy ash removal. It is made of food grade stainless steel AISI 304. The set includes a reliable bracket for wall mounting. AISI 304 stainless steel products do not rust and do not change their appearance during operation. Our set will last a long time and will delight its owners.

Spiral prismatic nozzle (SPN) СЕЛИВАНЕНКО® is used for filling distillation columns in the production of alcohol and alcoholic beverages, as well as for other processes of liquids fractionation. It represents several whorl of the spiral, turned relative to each other at a certain angle. The size of each element is 3 mm * 3 mm. SPN СЕЛИВАНЕНКО® is made of high-quality stainless steel food grade wire, and then undergoes a unique treatment to ensure an extended surface and good wetting ability, which compares it favorably with the products of competitors. SPN performance capability is achieved by a two-stage surface treatment, including not only acid etching, but also calcinating at high temperature. Number of SPN:1 liter Material:stainless steel Size of SPN elements:3mm * 3mm * 0,2mm

The most efficient model of washing equipment designed for continuous processing of parts. It may include washing, rinsing and drying units. The washing unit is equipped with a conveyor, a control cabinet, an assembly compartment, an oil separator, tubular electric heating element, a temperature sensor and a solution level meter. The conveyor speed is individually adjustable and can reach several meters per minute. The unit is designed for surface treatment by high pressure water jets to remove oil and grease contaminants, fine chip, cooling mixtures, and coked-free sand and dust deposition. The installation fully meets modern requirements applicable to the parts, components and assemblies washing technology. The unit is intended for indoor use. Washing space length:Min 2500 mm, Max 5600 mm Washing space width:Min. 700 mm, Max 1000 mm Washing space height:Min 400 mm, Max 900 mm Conveyor speed:Min 0,5 m/min Max 5 m/min Capacity (maximum):70 kg/ sq.m.

Operating from a single-phase 220 V network, the industrial welding inverter ТОРУС-250 Extra has an increased arc welding current up to 250 Amperes and, therefore, an increased percentage of operating time (TP). This allows performing continuous welding works: the device provides TP = 100% at an arc welding current of up to 225 Amperes (electrodes with a diameter of 5 – 6 mm). The power consumption when welding with “household” electrodes with a diameter of 3 mm is such that the device can be connected to a regular household outlet. Thus, the ТОРУС-250 Extra device is universal for industrial facilities and for cottage areas. Max power, kW:8,2 Max current - Min current, А:40 - 250 Voltage, V:220 Open circuit voltage, V:65 Duration of on at maximum current, %:60 Weight, kg:5,7 Brand Name :Торус Country of origin:Russia

This type of disc knives is used for industrial cutting of mineral wool insulation, as well as for trimming it at the edges. Is especially popular on the equipment of the Italian company Gamma Meccanica SpA. Material: Heat-resistant alloy:Sharpening type: square shaped, one sided Thickness: 6 mm:Diameter: from 300 mm to 1000 mm End Type: radius:Material processing: mineral wool

The Fountain Set allows fountain quick installation in a city or private area. Bowl isn't included in the set. Fountain components are made of stainless steel for heavy duty and long service life. This ready-made solution is much cheaper than a custom greenfield project. You save money on engineering costs –sets are already designed based on tests and years of experience. The Set includes everything you need for assembly, except for the bowl and embedded elements. The package consists of: fountain nozzle, pump, filter case assembly, underwater cables set, fountain set control cabinet, LED RGB Illumination system, installation and operating manuals. Custom equipment set is possible based on the technical parameters and dimensions provided by the Customer.

UNIVERSALROHRE & SCHLÄUCHE /GENERAL TUBES & PIPES (GTP). Diese Rohre und Schläuche allgemeiner Anwendung werden als Rohrleitungselemente in den unterschiedlichsten Branchen verwendet. KESSELROHRE/BOILER TUBES. Kesselrohre werden in der Wärmeenergetik als Teil von Rohrkomponenten von Kesseln in Kraftwerken und Industriebetrieben eingesetzt. SCHLAUCH FÜR BMSR/INSTRUMENTATION TUBING (IT). Präziser Schlauch aus nichtrostendem Stahl. WÄRMETAUSCHERROHRE/HEAT EXCHANGER TUBING (HEX). Wärmetauscherrohre sind für die Wärmeübertragung ausgelegt und werden hauptsächlich in Heiz-, Kühl-, Lüftungs-, Kondensations- und Verdampfungsprozessen eingesetzt. AUSGEBOHRENE SCHÄFTE (HB). Dickwandige nahtlose Rohre aus nichtrostendem Stahl für mechanische Zwecke.

Tool and high speed steel It is used for all types of cutting tools when machining unalloyed engineering steels. Steel grades:High-speed steels, category R9 European steel grades (analogous to this):AISI 430

Scrap and waste of structural steels alloyed with nickel and molybdenum, and their combinations with chromium, silicon, manganese and other elements, except tungsten. Chemical composition:Ni 0.4% — 2.3% Cr < 2%

Scrap and waste of corrosion-resistant and heat-resistant steels alloyed with chromium and nickel and their combinations with silicon, manganese and titanium, aluminium and other alements except for molybdenum, tungsten, niobium and boron. Chemical composition:Ni 5.0% — 9,5% Cr 12.0% — 18.0% Ti <1.2% Al < 1.4% Fe basis

Scrap and waste of heat-resistant chromium-nickel steels with a high content of chromium and nickel Chemical composition:Ni 34.0% — 38.0% Cr 14.0% — 16.0% W 2.8% — 3.5% Fe-based Steel grade:XN35VT (EI621)

TUYAUX MULTI-USAGE & TUBES/GENERAL TUBES & PIPES (GTP) Ces tuyaux et tubes à usage général sont utilisés en tant que les éléments des canalisations dans les différentes secteurs de l’industrie. TUBES DE CHAUDIÈRE/BOILER TUBES. Les tubes de chaudière sont utilisés dans l’ingénierie de l’énergie thermique comme les composants des membres tubulaires des chaudières aux centrales électriques et dans les entreprises industrielles. TUBE POUR L’INSTRUMENTATION/INSTRUMENTATION TUBING (IT). Le tube en acier inoxydable de haute précision. TUBE DE L’ÉCHANGEUR DE CHALEUR/HEAT EXCHANGER TUBING (HEX). Les tuyaux de l’échangeur de chaleur sont destinés à transmettre la chaleur et sont utilisés généralement pour les processus du chauffage, du refroidissement, de la ventilation, de la condensation et de l’évaporation. BARRES CREUSES/HOLLOW BARS (HB). Les tuyaux forts sans soudure en acier inoxydable sont utilisés pour les fins mécaniques.

Scrap and waste of steels alloyed with chromium, nickel, molybdenum, vanadium and copper. Chemical composition:Ni 2,0% — 5,0% Cr 0,6% — 2,0% With 0.6% - 1.5% Steel grade:15Х2Н3MDF, 12ХН4MDF

Scrap and waste of heat-resistant steels alloyed with chromium, or chromium and titanium. Chemical composition:By <0.6% Cr 24.0% – 30.0% Steel grade:15Х25Т (Х25Т, ЭИ439), 15Х28 (Х28, ЭИ349)

Scrap and waste of double-layer steels, which are graded as "alloyed" according to the average chemical composition. Waste group:B13 Clad steel grade:08Х18Н10Т, 12Х18Н10Т Base steel grade:VSt3, 20K, 09G2T (M)

TUBOS UNIVERSALES Y ТUBITOS/GENERAL TUBES & PIPES (GTP). Estos tubos y tubitos de uso general se usan en calidad de los elementos de las tuberías en las ramas más diferentes de la industria. TUBOS DE CALDERA/BOILER TUBES. Tubos de caldera se usan en la termoenergética como parte de los componentes tubulares de las calderas en las centrales eléctricas y empresas industriales. TUBITO PARA APARATOS DE CONTROL Y MEDICIÓN/INSTRUMENTATION TUBING (IT). Es tubo de alta precisión fabricado del acero inoxidable. TUBO DE CAMBIADOR DE CALOR (TERMOPERMUTADOR)/HEAT EXCHANGER TUBING (HEX). Los tubos de termopermutador están destinados para la transmisión del calor y se usan en general en los procesos de calentamiento, de refrigeramiento, de ventilación, de condensación y de evaporización. BARRAS HUECAS/HOLLOW BARS (HB). Son tubos sin costura de pared gruesa del acero inoxidable que se usan para los objetivos mecánicos.

Scrap and waste of heat-resistant steels alloyed with chromium, nickel, molybdenum, tungsten and vanadium. Chemical composition:Ni 0.4% – 2.6% Cr 10.5% – 15.5% W 0.7% – 2.2% Mo 0.3% - 0.7% Fe-based

Scrap And Waste Of Chromium Steels, Group B18 Chemical composition:By <0.6% Cr 12.0% – 14.0% EU steel grade analogues:AISI 405, 409, 416, 420

Scrap and waste of corrosion-resistant steels alloyed with chromium, nickel and molybdenum, and their combinations with titanium and other elements, except tungsten and boron Chemical composition:Ni 11.0% — 17,0% Cr 14.0% — 19.0% Mo 1.8% - 4.0% Ti <0.8% Fe basis EU steel grade analogues:AISI 316, 316L, 317, 321